DOI: http://dx.doi.org/10.5027/andgeoV46n1-3067

Crustal faults in the Chilean Andes: geological constraints and seismic potential

Isabel Santibañez, J. Cembrano, T. García-Pérez, C. Costa, G. Yáñez, C. Marquardt, G. Arancibia, G. González

Abstract


The Chilean Andes, as a tectonic and geomorphological region, is a perfect location to unravel the geologic nature of seismic hazards. The Chilean segment of the Nazca - South American subduction zone has experienced mega-earthquakes with Moment Magnitudes (Mw) > 8.5 (e.g. Mw 9.5 Valdivia, 1960; Mw 8.8 Maule, 2010) and many large earthquakes with Mw > 7.5, both with recurrence times of tens to hundreds of years. By contrast, crustal faults within the overriding South American plate commonly have longer recurrence times (thousands of years) and are known to produce earthquakes with maximum Mw of 7.0 to 7.5. Subduction-type earthquakes are considered the principal seismic hazard in Chile, with the potential to cause significant damage to its population and economy, however crustal (non-subduction) earthquakes can also cause great destruction at a local scale, because of their shallower hypocentral depth. However, the nature, timing and slip rates of crustal seismic sources in the Chilean Andes remain poorly constrained. This work aims to address the seismic potential of the crustal faults in Chile, contributing to the estimation of key fault parameters for the seismic hazard assessment. We have examined the main parameters involved in the magnitude of an earthquake, including length, width and mean displacement for crustal faults and their morphotectonic settings, exposing the parametrical similarities in longitudinal domains (N-S stripes) and disparity from W to E, across latitudinal domains. It is shown that the maximum hypocentral depths for crustal earthquakes vary across the tectonic domains aligned parallel to the Chilean margin, from 25-30 km in the outer forearc to 8-12 km in the volcanic arc, thus allowing for a first-order approach for seismic potential assessment. Current structural, paleoseismological and geodetic data, although sparse and limited, suggest that slip rates of Chilean crustal faults range from 0.2 mm/y (in the forearc region) to up to 7.0 mm/y (in the intra-arc region). The different tectonic modes for crustal fault reactivation and their wide range of slip rates complicates the estimation of seismic hazard. A rigorous seismic hazard assessment must therefore consider the different tectonic settings, timing and slip rates of Andean crustal faults. Understanding the nature of these faults will allow a better evaluation of the associated seismic hazard, and better constraints to be placed on their relationship with the subduction seismic cycle.

Keywords


Crustal Faults; Seismic Hazard; Neotectonics; Crustal earthquakes; Paleoseismology; Chilean Andes.

How to cite this article Santibañez, I., Cembrano, J., García-Pérez, T., Costa, C., Yáñez, G., Marquardt, C., Arancibia, G., and González, G., 2018, Crustal faults in the Chilean Andes: geological constraints and seismic potential: Andean Geology, v. 46, no. 1, , doi:http://dx.doi.org/10.5027/andgeoV46n1-3067